Must read before use:
If want to repair Xiaomi Mi 4c device, can try to repair it by. have to charge a battery with any charger and charged it by 95%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged
About this method:
Before use, this method must read carefully all content after following step by step, because sometimes, not success in flashing, why ? cause not properly read, and in this post giving required which for dead recovery if any missing can't solve so first need to read all are content.
Below given software Issues:
Xiaomi Mi 4c flash file is tested and it is working very well without any error, can use this flash file when device can use this guide when device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance, pattern lock, screen lock etc these type issues can use this way etc. This is used without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.
Here mention on requirement for this method, first must charge battery if can't flashing, must be working Micro USB Cable and use quality, stock ROM it's must be not corrupted (note : if any error when you try to extract then not use stock ROM), must be installed USB driver in your computer this also in required without it you can't connect, must be working well device USB socket which connect for flashing after connect there not to be error like USB not recognized, computer or laptop there also must be working well USB port or also must be installed USB driver which computer or laptop's driver is different between device or computer.
If want to repair Xiaomi Mi 4c device, can try to repair it by. have to charge a battery with any charger and charged it by 95%. Your data is very important for so it is good to do a backup of data it may consist of contact details, important messages, emails or any other important thing which feel to be the backup in a device. This backup can be done on another device. we have to do the backup because after a format of a device, all data will be gone and it will not be recovered. For backup in other devices, you can use another external device like hard drive, SD card or any other suitable devices. If are doing by own. do it at your own risk as we don't take any responsibility if a device is damaged
About this method:
Before use, this method must read carefully all content after following step by step, because sometimes, not success in flashing, why ? cause not properly read, and in this post giving required which for dead recovery if any missing can't solve so first need to read all are content.
Below given software Issues:
Xiaomi Mi 4c flash file is tested and it is working very well without any error, can use this flash file when device can use this guide when device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto app installing, auto gone balance, pattern lock, screen lock etc these type issues can use this way etc. This is used without any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check micro USB cable. if it is not good, can not flash it. and the another one is to check device battery. it should not be low, it can stop device between flash. before the flash, it is necessary to save data like contacts, photos, videos and other important things.
Here mention on requirement for this method, first must charge battery if can't flashing, must be working Micro USB Cable and use quality, stock ROM it's must be not corrupted (note : if any error when you try to extract then not use stock ROM), must be installed USB driver in your computer this also in required without it you can't connect, must be working well device USB socket which connect for flashing after connect there not to be error like USB not recognized, computer or laptop there also must be working well USB port or also must be installed USB driver which computer or laptop's driver is different between device or computer.
Requisite for Xiaomi Mi 4c
- Xiaomi Mi 4c device with good battery charged, do not try with low battery
<1-- adsense -->- Xiaomi Mi 4c Stock ROM Firmware | Download
- Micro USB Cable with good quality
- Computer or Laptop
Procedure for Xiaomi Mi 4c
- Take tested Stock ROM firmware from above link (plz if link dead just leave your comment)
- Go to Firmware winrar and please rename to .tgz, if is .gz or tar
- Extract to desktop both winrar (Note : Must your firmware folder on desktop or root folder)
- Open Mi folder and choose MiFlash.exe file and open it
- Click on Browse button and choose firmware folder who in desktop (see below image)
Note : Above Image For Example- Click on Point button near browse button and choose Advance option (see below image)
Note : Above Image For Example- Choose Browse.. button to FastBoot script's and choose flash_all_except_storage.bat file from desktop firmware folder (see below image)
Note : Above Image For Example- Turn off device, Press the Volume Down + Power keys same time for enter Fastboot mode
- Attach Micro USB cable and click on Refresh button in flash tool (for device detect or not)
- If device detect with flash tool then click on Flash button
- Wait until driver install, if driver installed in computer or laptop then downloading automatically start
- Wait until full flash device
- Congratulation you are done
Xiaomi Mi 4c Flash done Screenshot:
- Take tested Stock ROM firmware from above link (plz if link dead just leave your comment)
- Go to Firmware winrar and please rename to .tgz, if is .gz or tar
- Extract to desktop both winrar (Note : Must your firmware folder on desktop or root folder)
- Open Mi folder and choose MiFlash.exe file and open it
- Click on Browse button and choose firmware folder who in desktop (see below image)
- Click on Point button near browse button and choose Advance option (see below image)
0 comments:
Post a Comment