What do all the codes mean? Which One Do I Need?
See Here
How To Use Odin
Install samsung usb drivers here
Turn phone off (or pull battery and put back in)
Put your phone into download mode - hold vol down home button then with them held also hold power button
Connect usb cable from phone to pc (use rear usb ports not front ones if you have front usb)
Push vol up to start connection
Open odin 3.07 which you can find by the power of google (other versions may work but thats the one I use)
If odin is connected it will say com then a number is a coloured box under com:id on the left hand side
Only auto reboot and F.reset time shoud be ticked - DO NOT tick anything else!
Put pda in pda
Put modem in phone
Put csc in csc
Start the flashing process
Phone will automatically restart and boot once done
Note if it bootloops just go into recovery and wipe data/reset and restart
If the firmware you want is not listed below try looking on Sammobile
Once you have downloaded the firmware from Sammobile you can use SplitFus2 by Doky in order to split the firmware into pda modem and csc in order to flash via odin - my guide to which can be found Here
Galaxy Y Duos S6102 Firmware
Quote:
| India S6102_DDMF4_ODDMF4_DDMF4_wipe_by_SplitFUS2 Indonesia, Malaysia, Philippines, Singapore, Vietnam S6102_DXMD1_OLBMD1_DXMD1_wipe_by_SplitFUS2 Arabic S6102_JPMA3_OJPMA3_XXMA2_wipe_by_SplitFUS2 European S6102_XXMC1_XENLC1_XXMA2_wipe_by_SplitFUS2 |
Galaxy Y Pro B5510
Quote:
| Indonesia, Malaysia, Philippines, Singapore, Vietnam B5510_DXLF1_OLBLF1_DXLE1_wipe_by_SplitFUS2 Arabic B5510_JPLI1_OJPLF1_XXLH3_wipe_by_SplitFUS2 European B5510_XXLK3_OXALK3_XXLK1_wipe_by_SplitFUS2 |
0 comments:
Post a Comment